air hole
英 [eə(r) həʊl]
美 [er hoʊl]
通气孔
英英释义
noun
- a hole that allows the passage of air
- a local region of low pressure or descending air that causes a plane to lose height suddenly
双语例句
- Open the air hole; the fire is dying down. Sheets of postage stamps are perforated.
把气孔打开，火要熄了。大张的邮票上打有齿孔。 - According to air pressure inside rotary cavity flow, cavity diameter of rotary cavity flow and ventilation volume of air hole, basic flow pattern of this type of tunnel can be classified as submerged, absorbing and free flow patterns.
这种泄水道的流态可根据空腔环流内的气体压强、空腔直径和通气孔的通气量的变化规律分为淹没流流态、吸允流流态和自由流流态； - Dispersion Properties of Photonic Quasicrystal Fibers with an Air Hole Varying Cladding
包层空气孔渐变的准光子晶体光纤的色散特性研究 - The defect of air hole is ubiquitous when welding the aluminium or aluminium alloy with MIG. This paper affords the prevention measures from the aspects as fieldwork, especially paies attention to experience.
铝及铝合金MIG焊接时气孔缺陷的发生极其普遍，文章从现场的各方面给出了工艺预防措施，尤其注重了现场的经验性。 - The results show that regulation of air hole diameter and the cladding air hole pitch size, change the media filling ratio, can effectively control the photonic crystal fibers.
结果证明，调节空气孔直径和包层空气孔间距的大小，改变介质的填充比，可以有效地控制光子晶体光纤的色散。 - The measures to control the vapor purging time and flow rate of vapour, enlarge the oil-gas space and increase the number of air hole as well as venting area are given, which can effectively prevent the tank top from cracking.
提出采取严格控制扫线作业时间和扫线蒸汽流量，增大油气空间的体积和增加罐顶通气孔数量和面积等措施，可有效地预防该类事故的发生。 - The defects of welding of pure aluminum are air hole, un interfuse, occlude and holding wolframium, etc.
纯铝在焊接过程中存在的主要缺陷是气孔、未熔合、夹杂及夹钨等。 - A plurality of transverse baffles are positioned in the cylinder, on which an air hole, a weir and a tube for catalyst flow are positioned and on top or bottom of which a vapor inlet is positioned.
筒体内设有横向隔板，隔板上设有通气孔、堰和降剂管，隔板上面或者下面设有蒸汽进口。 - This thesis describes this technique in detail, and studies anamorphic core-shape PCF and mode converters based on controlled air hole collapse theoretically and experimentally.
本文对PCF的选择性空气孔塌缩技术进行了详细地介绍，并对应用该技术制成的纤芯变形PCF和模式转化器进行了理论分析，以及相应的数值模拟和实验研究。 - After setting the air hole, the fault is removed.
经增设通气孔后，故障被排除。